|
|
|
| This
laser-assisted wheel alignment system is the
most common and most widely sold system of all
in our range of products.The system is also the
oldest in our catalogue but has been improved
and updated over the years. It is no coincidence
that it is this JOSAM equipment that has been
exported to most countries around the world. It
is simple, demands minimum maintenance and is
manually operated. Additional software for
Windows is available as a complement for
calculations, data storage and printouts. |
 |
 |
| The
JOSAM laser AM system for alignment of
axles and wheels and also for distorted
chassis is a quick and accurate system
at low cost.
| The
Pocket AM software helps you to
calculate, work with the whel angles and
save the data when working without a PC.
It is syncronized with the PC software
JOSAM communicator. |
|
| The JOSAM laser
AM system stands for precise wheel, axle and
frame alignment at a relatively low investment.
This reliable equipment can measure the wheel
angles of trucks, coaches, semi-trailers,
full-trailers, mobile cranes and other heavy
vehicles and also check the vehicle's chassis or
other frame constructions in a simple way. The
system is based upon laser technology and uses
the geometric centerline as its reference.
Measuring scales are moved out from the
centerline and are targeted by a laser projector
which in turn is mounted on a wheel adapter on
each side of the axle which is measured. Our
most basic "laser AM" system for
toe-measurement can of course be expanded into a
sophisticated system which can measure all wheel
angles as well as frame measurement. |
Measurement
data is typed into the calculation software in a
PC. It computes the results, stores it or
enables you to print it "before" and
"after adjustment" (Please click on
image for an enlargement). Further, a frame
measurement version is also available. |
|
With
JOSAM laser AM we can easily verify whether or
not the wheel angles are distorted and if
necessary, cure the problem. The frame can also
be straightened simultaneously as we measure it
with the system.
Moreover, we can assess if all the wheels are
rolling in the same direction and parallel to
the centerline of the frame. Even though the
system is an analogue system, its measurements
may be calculated and graphically presented in
PC-software which also stores the data and makes
four-colour printing possible. The software.
JOSAM communicator, is available both for frame
measurement and wheel alignment. |
|
|
|
1-800-950-4155
Questions or
Comments click here to e-mail us.
|
|
